Taelek Matter Bridge
Certified on July 17, 2026, updates are not expected yet
Taelek Matter Bridge by Taelek: certified Matter device (Bridge / aggregator). Radio: Wi-Fi. Matter 1.4.
Matter Bridge for Supported BLE Devices
Price comparison
No price comparison has been set up for this device yet.
Compatibility with smart home platforms
Whether the platform supports this device type (Bridge / aggregator). This is an assessment based on the platforms’ lists, not a guarantee for every feature.
- Google HomeDevice type supported
- Amazon AlexaDevice type supported
- Apple Home *Device type usually supported
- SmartThings *Device type usually supported
- Home Assistant *Device type usually supported
Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.
Technical data
- Manufacturer
- Taelek
- Product type
- Bridges & border routers
- Device type
- Bridge / aggregator
- Radio protocol
- Wi-Fi
- Matter version
- Matter 1.4
- Model number
- 6429811822009
- First certified
- July 17, 2026
- Certificate ID
- CSA263Z7MAT54563-24
- Vendor / product ID (VID/PID)
- 0x1629 / 0x0100 (5673 / 256)
Reset Taelek Taelek Matter Bridge
How to factory reset Taelek Taelek Matter Bridge so you can set up the Matter device again or hand it on. Remove the device in your controller first, otherwise an entry stays behind there.
Manufacturer’s note (certification database)
YELLOW
Resetting erases the device’s settings and assignments.
How do I factory reset Taelek Taelek Matter Bridge?
The steps are in the section on this page. Remove the device in your controller first, then perform the reset.
Do I have to remove the device from the app first?
Ideally yes: remove it in your controller or smart home app first so its pairing is deleted there. Then reset the device.
What is lost when I reset it?
The device’s settings and assignments, including its connection to all Matter systems (multi-admin). You can set it up again afterwards.
The reset does not work – what now?
Check the manufacturer’s manual and support to see whether the procedure applies to your model. Check power and range; Thread devices need a reachable border router.
Manufacturer links
Update history (certified firmware versions)
One version is certified so far (since July 17, 2026). New versions appear here automatically.
| Version | Certified on | Matter | Certificate ID |
|---|---|---|---|
| 0.5.8 | July 17, 2026 | 1.4 | CSA263Z7MAT54563-24 |
Articles about this device
- Matter Bridge Explained: Connecting Zigbee and Other DevicesOctober 26, 2026
- Matter vs Zigbee Compared: Differences and What Suits YouOctober 26, 2026
- Switching from Zigbee to Matter? Running Both Is EnoughOctober 26, 2026
Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.