Shelly Presence Gen4
Only the initial certification so far (November 18, 2025), no update certified
Shelly Presence Gen4 by Shelly: certified Matter device (Occupancy sensor). Radio: Wi-Fi. Matter 1.3.
Price comparison
Compatibility with smart home platforms
Whether the platform supports this device type (Occupancy sensor). This is an assessment based on the platforms’ lists, not a guarantee for every feature.
- Google HomeDevice type supported
- Amazon AlexaDevice type supported
- Apple Home *Device type usually supported
- SmartThings *Device type usually supported
- Home Assistant *Device type usually supported
Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.
Technical data
- Manufacturer
- Shelly
- Product type
- Sensors
- Device type
- Occupancy sensor
- Radio protocol
- Wi-Fi
- Matter version
- Matter 1.3
- Model number
- 0x1821
- First certified
- November 18, 2025
- Certificate ID
- CSA25E3FMAT48529-24
- Vendor / product ID (VID/PID)
- 0x1490 / 0x1821 (5264 / 6177)
Reset Shelly Shelly Presence Gen4
How to factory reset Shelly Shelly Presence Gen4 so you can set up the Matter device again or hand it on. Remove the device in your controller first, otherwise an entry stays behind there.
Manufacturer’s instructions
- Die Taste am Gerät 10 Sekunden lang gedrückt halten.
- Das Gerät wird auf Werkseinstellungen zurückgesetzt.
- Achtung: 5 Sekunden halten führt nur einen Netzwerk-Reset durch, keinen Werksreset.
Source: kb.shelly.cloud
Resetting erases the device’s settings and assignments.
How do I factory reset Shelly Shelly Presence Gen4?
The steps are in the section on this page. Remove the device in your controller first, then perform the reset.
Do I have to remove the device from the app first?
Ideally yes: remove it in your controller or smart home app first so its pairing is deleted there. Then reset the device.
What is lost when I reset it?
The device’s settings and assignments, including its connection to all Matter systems (multi-admin). You can set it up again afterwards.
The reset does not work – what now?
Check the manufacturer’s manual and support to see whether the procedure applies to your model. Check power and range; Thread devices need a reachable border router.
Manufacturer links
Update history (certified firmware versions)
One version is certified so far (since November 18, 2025). New versions appear here automatically.
| Version | Certified on | Matter | Certificate ID |
|---|---|---|---|
| 1.3.0-s1 | November 18, 2025 | 1.3 | CSA25E3FMAT48529-24 |
Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.
