MS600
Only the initial certification so far (April 17, 2024), no update certified
MS600 by Meross: certified Matter device (Occupancy sensor). Radio: Wi-Fi. Matter 1.2.
Smart Presence Sensor
Price comparison
Compatibility with smart home platforms
Whether the platform supports this device type (Occupancy sensor). This is an assessment based on the platforms’ lists, not a guarantee for every feature.
- Google HomeDevice type supported
- Amazon AlexaDevice type supported
- Apple Home *Device type usually supported
- SmartThings *Device type usually supported
- Home Assistant *Device type usually supported
Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.
Technical data
- Manufacturer
- Meross
- Product type
- Sensors
- Device type
- Occupancy sensor
- Radio protocol
- Wi-Fi
- Matter version
- Matter 1.2
- Model number
- 42010110
- First certified
- April 17, 2024
- Certificate ID
- CSA241F5MAT43176-24
- Vendor / product ID (VID/PID)
- 0x1345 / 0x4201 (4933 / 16897)
Setup (manufacturer instructions)
orange, green
Reset Meross MS600
How to factory reset Meross MS600 so you can set up the Matter device again or hand it on. Remove the device in your controller first, otherwise an entry stays behind there.
Manufacturer’s instructions
- Taste auf der Rückseite des Sensors drücken und gedrückt halten.
- Taste nicht loslassen, bis die Kontrollleuchte abwechselnd orange und grün blinkt.
- Taste loslassen. Der Sensor wird danach zurückgesetzt.
Source: meross.com
Resetting erases the device’s settings and assignments.
How do I factory reset Meross MS600?
The steps are in the section on this page. Remove the device in your controller first, then perform the reset.
Do I have to remove the device from the app first?
Ideally yes: remove it in your controller or smart home app first so its pairing is deleted there. Then reset the device.
What is lost when I reset it?
The device’s settings and assignments, including its connection to all Matter systems (multi-admin). You can set it up again afterwards.
The reset does not work – what now?
Check the manufacturer’s manual and support to see whether the procedure applies to your model. Check power and range; Thread devices need a reachable border router.
Manufacturer links
Update history (certified firmware versions)
One version is certified so far (since April 17, 2024). New versions appear here automatically.
| Version | Certified on | Matter | Certificate ID |
|---|---|---|---|
| 9.3.4 | April 17, 2024 | 1.2 | CSA241F5MAT43176-24 |
Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.
