DIRIGERA
Firmware actively maintained: latest certified update on July 22, 2026
DIRIGERA by IKEA of Sweden: certified Matter device (Bridge / aggregator). Radio: Ethernet. Matter 1.3.
DIRIGERA Hub for smart products
Price comparison
No price comparison has been set up for this device yet.
Compatibility with smart home platforms
Whether the platform supports this device type (Bridge / aggregator). This is an assessment based on the platforms’ lists, not a guarantee for every feature.
- Google HomeDevice type supported
- Amazon AlexaDevice type supported
- Apple Home *Device type usually supported
- SmartThings *Device type usually supported
- Home Assistant *Device type usually supported
Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.
Technical data
- Manufacturer
- IKEA of Sweden
- Product type
- Bridges & border routers
- Device type
- Bridge / aggregator
- Radio protocol
- Ethernet
- Matter version
- Matter 1.3
- Model number
- 505.034.09
- First certified
- January 26, 2024
- Latest certification
- July 22, 2026
- Certificate ID
- CSA263ZZMAT54591-00
- Vendor / product ID (VID/PID)
- 0x117C / 0x8003 (4476 / 32771)
Reset IKEA of Sweden DIRIGERA
How to factory reset IKEA of Sweden DIRIGERA so you can set up the Matter device again or hand it on. Remove the device in your controller first, otherwise an entry stays behind there.
Manufacturer’s instructions
- Eine stumpfe Nadel in die Reset-Öffnung auf der Rückseite des DIRIGERA-Hubs stecken.
- Die Nadel so lange gedrückt halten, bis die Statusleuchten erlöschen.
- Der Reset ist abgeschlossen, wenn die mittlere Leuchte viermal rot blinkt.
- Achtung: Dabei werden alle Daten des Hubs gelöscht, also Einstellungen, Szenen, gekoppelte Geräte und Integrationen.
Source: ikea.com
Resetting erases the device’s settings and assignments.
How do I factory reset IKEA of Sweden DIRIGERA?
The steps are in the section on this page. Remove the device in your controller first, then perform the reset.
Do I have to remove the device from the app first?
Ideally yes: remove it in your controller or smart home app first so its pairing is deleted there. Then reset the device.
What is lost when I reset it?
The device’s settings and assignments, including its connection to all Matter systems (multi-admin). You can set it up again afterwards.
The reset does not work – what now?
Check the manufacturer’s manual and support to see whether the procedure applies to your model. Check power and range; Thread devices need a reachable border router.
Manufacturer links
Update history (certified firmware versions)
4 certified versions, latest on July 22, 2026. New versions appear here automatically once they are listed in the certification database.
| Version | Certified on | Matter | Certificate ID |
|---|---|---|---|
| 4current | July 22, 2026 | 1.3 | CSA263ZZMAT54591-00 |
| 3 | May 21, 2025 | 1.3 | CSA252AEMAT45568-00 |
| 2 | August 15, 2024 | 1.2 | CSA24406MAT43705-00 |
| 1First certification | January 26, 2024 | 1.2 | CSA2409CMAT42831-00 |
Articles about this device
Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.