Eve Energy (Europe)
No certified firmware update since August 29, 2024
Thread border router required. This device uses Thread and needs a Thread border router, for example a HomePod, Apple TV, Nest Hub or Echo. Compare border routers →
Eve Energy (Europe) by Eve: certified Matter device (On/off plug-in unit). Radio: Thread. Matter 1.3.
Eve Energy
Price comparison
Compatibility with smart home platforms
Whether the platform supports this device type (On/off plug-in unit). This is an assessment based on the platforms’ lists, not a guarantee for every feature.
- Google HomeDevice type supported
- Amazon AlexaDevice type supported
- Apple Home *Device type usually supported
- SmartThings *Device type usually supported
- Home Assistant *Device type usually supported
This device uses Thread: the platform needs a Thread border router, for example a HomePod, Apple TV, Nest Hub or an Echo with Thread. Compare border routers →
Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.
Technical data
- Manufacturer
- Eve
- Product type
- Plugs & in-wall actuators
- Device type
- On/off plug-in unit
- Radio protocol
- Thread
- Matter version
- Matter 1.3
- Model number
- 20EBO8301
- First certified
- October 31, 2022
- Latest certification
- August 29, 2024
- Certificate ID
- CSA24490MAT43843-24
- Vendor / product ID (VID/PID)
- 0x130A / 0x0050 (4874 / 80)
Reset Eve Eve Energy (Europe)
How to factory reset Eve Eve Energy (Europe) so you can set up the Matter device again or hand it on. Remove the device in your controller first, otherwise an entry stays behind there.
Manufacturer’s instructions
- Den Eve Energy in eine Steckdose stecken.
- Die Reset-Taste so lange gedrückt halten, bis die LED rot blinkt.
Source: evehome.com
Resetting erases the device’s settings and assignments.
How do I factory reset Eve Eve Energy (Europe)?
The steps are in the section on this page. Remove the device in your controller first, then perform the reset.
Do I have to remove the device from the app first?
Ideally yes: remove it in your controller or smart home app first so its pairing is deleted there. Then reset the device.
What is lost when I reset it?
The device’s settings and assignments, including its connection to all Matter systems (multi-admin). You can set it up again afterwards.
The reset does not work – what now?
Check the manufacturer’s manual and support to see whether the procedure applies to your model. Check power and range; Thread devices need a reachable border router.
Manufacturer links
Update history (certified firmware versions)
4 certified versions, latest on August 29, 2024. New versions appear here automatically once they are listed in the certification database.
| Version | Certified on | Matter | Certificate ID | Download firmware |
|---|---|---|---|---|
| 3.5.0current | August 29, 2024 | 1.3 | CSA24490MAT43843-24 | Download firmware (861 KB)SHA-256: G+g+y5ksfMqzxwoq6uDblACdFkiGzB1cMJoypqSTSTA= |
| 3.2.1 | June 15, 2023 | 1.0 | CSA23644MAT41157-24 | Download firmware (870 KB)SHA-256: MO+9nc1o5vG74qC85pvd9MVe6QGbFQNbG2mbQvzRIVA= |
| 3.2.0 | March 28, 2023 | 1.0 | CSA23284MAT40797-24 | Download firmware (870 KB)SHA-256: Y8jb7u6WRn4EZIyqkEzu9hbh1egj8fmnDuZHIgS5AJk= |
| 3.1.0First certification | October 31, 2022 | 1.0 | CSA22065MAT40065-24 |
The files are hosted by the manufacturer and only linked here (details and checksum from the CSA DCL). Matter devices usually update automatically through the manufacturer’s app; manual installation is only needed if the manufacturer provides for it. Use at your own risk.
Articles about this device
- Matter with Apple Home: Setup and Key DetailsOctober 26, 2026
Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.
