Skip to content
Matter.tips
en

Xthings Inc.

ULTRALOQ Smart Door Lock

Door locksDoor lockThreadMatter 1.4Certified in the CSA DCL

Only the initial certification so far (February 20, 2026), no update certified

Thread border router required. This device uses Thread and needs a Thread border router, for example a HomePod, Apple TV, Nest Hub or Echo. Compare border routers →

ULTRALOQ Smart Door Lock by Xthings Inc.: certified Matter device (Door lock). Radio: Thread. Matter 1.4.

Price comparison

No price comparison has been set up for this device yet.

Compatibility with smart home platforms

Whether the platform supports this device type (Door lock). This is an assessment based on the platforms’ lists, not a guarantee for every feature.

  • Google HomeDevice type supported
  • Amazon AlexaDevice type supported
  • Apple Home *Device type usually supported
  • SmartThings *Device type usually supported
  • Home Assistant *Device type usually supported

This device uses Thread: the platform needs a Thread border router, for example a HomePod, Apple TV, Nest Hub or an Echo with Thread. Compare border routers →

Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.

Technical data

Manufacturer
Xthings Inc.
Product type
Door locks
Device type
Door lock
Radio protocol
Thread
Matter version
Matter 1.4
Model number
BOLTPRO
First certified
February 20, 2026
Certificate ID
CSA2610QMAT50730-24
Vendor / product ID (VID/PID)
0x147F / 0x0007 (5247 / 7)

Factory reset

General advice

  1. First remove the device in your smart home app (controller) so its pairing is deleted there.
  2. Reset the device as the manufacturer describes – often a reset button or a fixed sequence of power cycles. The exact sequence differs per device; use the manual.
  3. The device then starts in pairing mode. Set it up again with its QR code or setup code.

Resetting erases the device’s settings and assignments.

Update history (certified firmware versions)

One version is certified so far (since February 20, 2026). New versions appear here automatically.

VersionCertified onMatterCertificate ID
01.55.0041February 20, 20261.4CSA2610QMAT50730-24

Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.

More devices from Xthings Inc.

All devices from Xthings Inc. →

Similar devices