Smart WaterLeak KM1
Only the initial certification so far (November 3, 2025), no update certified
Smart WaterLeak KM1 by ThirdReality: certified Matter device (Water leak detector). Radio: Wi-Fi. Matter 1.4.
Price comparison
Compatibility with smart home platforms
Whether the platform supports this device type (Water leak detector). This is an assessment based on the platforms’ lists, not a guarantee for every feature.
- Google HomeNot on the platform’s list
- Amazon AlexaDevice type supported
- Apple Home *Device type usually supported
- SmartThings *Unclear, check the manufacturer’s information
- Home Assistant *Device type usually supported
Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.
Technical data
- Manufacturer
- ThirdReality
- Product type
- Sensors
- Device type
- Water leak detector
- Radio protocol
- Wi-Fi
- Matter version
- Matter 1.4
- Model number
- 3RWLK01068M
- First certified
- November 3, 2025
- Certificate ID
- CSA25D2BMAT48253-24
- Vendor / product ID (VID/PID)
- 0x1407 / 0x1099 (5127 / 4249)
Factory reset
General advice
- First remove the device in your smart home app (controller) so its pairing is deleted there.
- Reset the device as the manufacturer describes – often a reset button or a fixed sequence of power cycles. The exact sequence differs per device; use the manual.
- The device then starts in pairing mode. Set it up again with its QR code or setup code.
Resetting erases the device’s settings and assignments.
Update history (certified firmware versions)
One version is certified so far (since November 3, 2025). New versions appear here automatically.
| Version | Certified on | Matter | Certificate ID | Download firmware |
|---|---|---|---|---|
| 1.0.0 | November 3, 2025 | 1.4 | CSA25D2BMAT48253-24 | |
| v1.00.24listed in the DCL, not certified | Download firmware (958 KB)SHA-256: IRS+m6jxyDvT+plQK/IyunUA//3mjGtp3GXbe6HLgfc= |
The files are hosted by the manufacturer and only linked here (details and checksum from the CSA DCL). Matter devices usually update automatically through the manufacturer’s app; manual installation is only needed if the manufacturer provides for it. Use at your own risk.
Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.
