TCL Portable AC
Certified on August 4, 2026, updates are not expected yet
The TCL Portable AC (W10PX2SD) is a room air conditioner using Wi-Fi and certified with Matter version 1.4. Certification occurred in August 2026. Firmware version 1.0 is available.
Price comparison
Compatibility with smart home platforms
Whether the platform supports this device type (Room air conditioner). This is an assessment based on the platforms’ lists, not a guarantee for every feature.
- Google HomeNot on the platform’s list
- Amazon AlexaDevice type supported
- Apple Home *Unclear, check the manufacturer’s information
- SmartThings *Device type usually supported
- Home Assistant *Device type usually supported
Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.
Technical data
- Manufacturer
- TCL
- Product type
- Heating, cooling & water
- Device type
- Room air conditioner
- Radio protocol
- Wi-Fi
- Matter version
- Matter 1.4
- Model number
- W10PX2SD
- First certified
- August 4, 2026
- Certificate ID
- CSA2645NMAT54795-24
- Vendor / product ID (VID/PID)
- 0x1334 / 0x29C4 (4916 / 10692)
Factory reset
General advice
- First remove the device in your smart home app (controller) so its pairing is deleted there.
- Reset the device as the manufacturer describes – often a reset button or a fixed sequence of power cycles. The exact sequence differs per device; use the manual.
- The device then starts in pairing mode. Set it up again with its QR code or setup code.
Resetting erases the device’s settings and assignments.
Update history (certified firmware versions)
One version is certified so far (since August 4, 2026). New versions appear here automatically.
| Version | Certified on | Matter | Certificate ID |
|---|---|---|---|
| 1.0 | August 4, 2026 | 1.4 | CSA2645NMAT54795-24 |
Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.
