Skip to content
Matter.tips
en

SwitchBot

Hub Mini

Bridges & border routersBridge / aggregatorWi-FiMatter 1.3Certified in the CSA DCL

No certified firmware update since August 25, 2025

Hub Mini by SwitchBot: certified Matter device (Bridge / aggregator). Radio: Wi-Fi. Matter 1.3.

Price comparison

No price comparison has been set up for this device yet.

Compatibility with smart home platforms

Whether the platform supports this device type (Bridge / aggregator). This is an assessment based on the platforms’ lists, not a guarantee for every feature.

  • Google HomeDevice type supported
  • Amazon AlexaDevice type supported
  • Apple Home *Device type usually supported
  • SmartThings *Device type usually supported
  • Home Assistant *Device type usually supported

Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.

Technical data

Manufacturer
SwitchBot
Product type
Bridges & border routers
Device type
Bridge / aggregator
Radio protocol
Wi-Fi
Matter version
Matter 1.3
Model number
W0202203
First certified
September 26, 2023
Latest certification
August 25, 2025
Certificate ID
CSA25652MAT46500-24
Vendor / product ID (VID/PID)
0x1397 / 0x07E8 (5015 / 2024)

Setup (manufacturer instructions)

15.1

Machine-translated – show the manufacturer’s original text

15,1

Reset SwitchBot Hub Mini

How to factory reset SwitchBot Hub Mini so you can set up the Matter device again or hand it on. Remove the device in your controller first, otherwise an entry stays behind there.

Manufacturer’s note (certification database)

15.1

Machine-translated – show the manufacturer’s original text

15,1

Resetting erases the device’s settings and assignments.

How do I factory reset SwitchBot Hub Mini?

The steps are in the section on this page. Remove the device in your controller first, then perform the reset.

Do I have to remove the device from the app first?

Ideally yes: remove it in your controller or smart home app first so its pairing is deleted there. Then reset the device.

What is lost when I reset it?

The device’s settings and assignments, including its connection to all Matter systems (multi-admin). You can set it up again afterwards.

The reset does not work – what now?

Check the manufacturer’s manual and support to see whether the procedure applies to your model. Check power and range; Thread devices need a reachable border router.

Update history (certified firmware versions)

3 certified versions, latest on August 25, 2025. New versions appear here automatically once they are listed in the certification database.

VersionCertified onMatterCertificate ID
2.0currentAugust 25, 20251.3CSA25652MAT46500-24
1.0-1.0November 7, 20231.0CSA23D26MAT41835-24
v1.0First certificationSeptember 26, 20231.0CSA23C24MAT41734-24

Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.

More devices from SwitchBot

All devices from SwitchBot →

Similar devices