Skip to content
Matter.tips
en

Silicon Labs

EFR32MG24X

LightingOn/off lightThreadMatter 1.0Certified in the CSA DCL

Only the initial certification so far (February 1, 2023), no update certified

Thread border router required. This device uses Thread and needs a Thread border router, for example a HomePod, Apple TV, Nest Hub or Echo. Compare border routers →

EFR32MG24X by Silicon Labs: certified Matter device (On/off light). Radio: Thread. Matter 1.0.

Price comparison

No price comparison has been set up for this device yet.

Compatibility with smart home platforms

Whether the platform supports this device type (On/off light). This is an assessment based on the platforms’ lists, not a guarantee for every feature.

  • Google HomeDevice type supported
  • Amazon AlexaDevice type supported
  • Apple Home *Device type usually supported
  • SmartThings *Device type usually supported
  • Home Assistant *Device type usually supported

This device uses Thread: the platform needs a Thread border router, for example a HomePod, Apple TV, Nest Hub or an Echo with Thread. Compare border routers →

Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.

Technical data

Manufacturer
Silicon Labs
Product type
Lighting
Device type
On/off light
Radio protocol
Thread
Matter version
Matter 1.0
Model number
xG24-RB4187C
First certified
February 1, 2023
Certificate ID
CSA23152MAT40665-24
Vendor / product ID (VID/PID)
0x1049 / 0x2400 (4169 / 9216)

Factory reset

General advice

  1. First remove the device in your smart home app (controller) so its pairing is deleted there.
  2. Reset the device as the manufacturer describes – often a reset button or a fixed sequence of power cycles. The exact sequence differs per device; use the manual.
  3. The device then starts in pairing mode. Set it up again with its QR code or setup code.

Resetting erases the device’s settings and assignments.

Update history (certified firmware versions)

One version is certified so far (since February 1, 2023). New versions appear here automatically.

VersionCertified onMatterCertificate ID
Gecko SDK 4.1.1February 1, 20231.0CSA23152MAT40665-24

Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.

More devices from Silicon Labs

All devices from Silicon Labs →

Similar devices