BSB002
No certified firmware update since October 21, 2024
BSB002 by Signify: certified Matter device (Bridge / aggregator). Radio: Ethernet. Matter 1.3.
Philips Hue Bridge
Price comparison
No price comparison has been set up for this device yet.
Compatibility with smart home platforms
Whether the platform supports this device type (Bridge / aggregator). This is an assessment based on the platforms’ lists, not a guarantee for every feature.
- Google HomeDevice type supported
- Amazon AlexaDevice type supported
- Apple Home *Device type usually supported
- SmartThings *Device type usually supported
- Home Assistant *Device type usually supported
Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.
Technical data
- Manufacturer
- Signify
- Product type
- Bridges & border routers
- Device type
- Bridge / aggregator
- Radio protocol
- Ethernet
- Matter version
- Matter 1.3
- Model number
- 046677458478
- First certified
- November 2, 2022
- Latest certification
- October 21, 2024
- Certificate ID
- CSA246A7MAT44378-00
- Vendor / product ID (VID/PID)
- 0x100B / 0x0002 (4107 / 2)
Setup (manufacturer instructions)
0
0
Reset Signify BSB002
How to factory reset Signify BSB002 so you can set up the Matter device again or hand it on. Remove the device in your controller first, otherwise an entry stays behind there.
Manufacturer’s instructions
- Optional: In der Hue App unter Einstellungen > Hue Bridges die Bridge auswählen und „Entfernen“ tippen.
- Das Ethernet-Kabel von der Bridge abziehen.
- Auf der Rückseite den kleinen, versenkten Reset-Knopf in der Nähe der Aufschrift „Restore factory settings“ suchen.
- Mit einer Büroklammer oder einem SIM-Auswurfwerkzeug in die Öffnung drücken und 5 bis 10 Sekunden halten.
- Warten, bis die vorderen LEDs blinken und das Blinken aufhört.
Source: philips-hue.com
Resetting erases the device’s settings and assignments.
How do I factory reset Signify BSB002?
The steps are in the section on this page. Remove the device in your controller first, then perform the reset.
Do I have to remove the device from the app first?
Ideally yes: remove it in your controller or smart home app first so its pairing is deleted there. Then reset the device.
What is lost when I reset it?
The device’s settings and assignments, including its connection to all Matter systems (multi-admin). You can set it up again afterwards.
The reset does not work – what now?
Check the manufacturer’s manual and support to see whether the procedure applies to your model. Check power and range; Thread devices need a reachable border router.
Manufacturer links
Update history (certified firmware versions)
3 certified versions, latest on October 21, 2024. New versions appear here automatically once they are listed in the certification database.
| Version | Certified on | Matter | Certificate ID |
|---|---|---|---|
| 1.3.0current | October 21, 2024 | 1.3 | CSA246A7MAT44378-00 |
| 1.1.0 | December 13, 2023 | 1.0 | CSA23K57MAT42558-00 |
| 1.0.0First certification | November 2, 2022 | 1.0 | CSA22079MAT40079-00 |
Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.