Shelly Plug US Gen4
Only the initial certification so far (February 10, 2025), no update certified
Shelly Plug US Gen4 by Shelly: certified Matter device (On/off plug-in unit). Radio: Wi-Fi. Matter 1.3.
Price comparison
No price comparison has been set up for this device yet.
Compatibility with smart home platforms
Whether the platform supports this device type (On/off plug-in unit). This is an assessment based on the platforms’ lists, not a guarantee for every feature.
- Google HomeDevice type supported
- Amazon AlexaDevice type supported
- Apple Home *Device type usually supported
- SmartThings *Device type usually supported
- Home Assistant *Device type usually supported
Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.
Technical data
- Manufacturer
- Shelly
- Product type
- Plugs & in-wall actuators
- Device type
- On/off plug-in unit
- Radio protocol
- Wi-Fi
- Matter version
- Matter 1.3
- Model number
- 0x1852
- First certified
- February 10, 2025
- Certificate ID
- CSA250D9MAT45099-24
- Vendor / product ID (VID/PID)
- 0x1490 / 0x1852 (5264 / 6226)
Reset Shelly Shelly Plug US Gen4
How to factory reset Shelly Shelly Plug US Gen4 so you can set up the Matter device again or hand it on. Remove the device in your controller first, otherwise an entry stays behind there.
Manufacturer’s instructions
- Den Stecker zuerst in die Steckdose stecken.
- Innerhalb von 60 Sekunden nach dem Einstecken die Taste 10 Sekunden lang gedrückt halten.
- Das Gerät wird auf Werkseinstellungen zurückgesetzt.
Source: kb.shelly.cloud
Resetting erases the device’s settings and assignments.
How do I factory reset Shelly Shelly Plug US Gen4?
The steps are in the section on this page. Remove the device in your controller first, then perform the reset.
Do I have to remove the device from the app first?
Ideally yes: remove it in your controller or smart home app first so its pairing is deleted there. Then reset the device.
What is lost when I reset it?
The device’s settings and assignments, including its connection to all Matter systems (multi-admin). You can set it up again afterwards.
The reset does not work – what now?
Check the manufacturer’s manual and support to see whether the procedure applies to your model. Check power and range; Thread devices need a reachable border router.
Manufacturer links
Update history (certified firmware versions)
One version is certified so far (since February 10, 2025). New versions appear here automatically.
| Version | Certified on | Matter | Certificate ID |
|---|---|---|---|
| 1.3.0-s2 | February 10, 2025 | 1.3 | CSA250D9MAT45099-24 |
Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.