AI Home KIT
Only the initial certification so far (August 27, 2025), no update certified
AI Home KIT by Samjin: certified Matter device (Bridge / aggregator). Radio: Wi-Fi. Matter 1.4.
Price comparison
No price comparison has been set up for this device yet.
Compatibility with smart home platforms
Whether the platform supports this device type (Bridge / aggregator). This is an assessment based on the platforms’ lists, not a guarantee for every feature.
- Google HomeDevice type supported
- Amazon AlexaDevice type supported
- Apple Home *Device type usually supported
- SmartThings *Device type usually supported
- Home Assistant *Device type usually supported
Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.
Technical data
- Manufacturer
- Samjin
- Product type
- Bridges & border routers
- Device type
- Bridge / aggregator
- Radio protocol
- Wi-Fi
- Matter version
- Matter 1.4
- Model number
- IA70001-AAK01
- First certified
- August 27, 2025
- Certificate ID
- CSA25691MAT46563-24
- Vendor / product ID (VID/PID)
- 0x1241 / 0x804E (4673 / 32846)
Factory reset
General advice
- First remove the device in your smart home app (controller) so its pairing is deleted there.
- Reset the device as the manufacturer describes – often a reset button or a fixed sequence of power cycles. The exact sequence differs per device; use the manual.
- The device then starts in pairing mode. Set it up again with its QR code or setup code.
Resetting erases the device’s settings and assignments.
Update history (certified firmware versions)
One version is certified so far (since August 27, 2025). New versions appear here automatically.
| Version | Certified on | Matter | Certificate ID | Download firmware |
|---|---|---|---|---|
| 1.0.0 | August 27, 2025 | 1.4 | CSA25691MAT46563-24 | |
| 1.0.1listed in the DCL, not certified | Download firmware (1.6 MB)SHA-256: G+HqucVCj/xX5lqWtHlgUDyhB3/+vHe/YhDpDvCHcf4= |
The files are hosted by the manufacturer and only linked here (details and checksum from the CSA DCL). Matter devices usually update automatically through the manufacturer’s app; manual installation is only needed if the manufacturer provides for it. Use at your own risk.
Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.