Skip to content
Matter.tips
en

Mayer & Co Beschläge GmbH

Sense by MACO | Casement

SensorsContact sensorThreadMatter 1.2Certified in the CSA DCL

Firmware actively maintained: latest certified update on April 14, 2026

Thread border router required. This device uses Thread and needs a Thread border router, for example a HomePod, Apple TV, Nest Hub or Echo. Compare border routers →

Sense by MACO | Casement by Mayer & Co Beschläge GmbH: certified Matter device (Contact sensor). Radio: Thread. Matter 1.2.

Price comparison

No price comparison has been set up for this device yet.

Compatibility with smart home platforms

Whether the platform supports this device type (Contact sensor). This is an assessment based on the platforms’ lists, not a guarantee for every feature.

  • Google HomeDevice type supported
  • Amazon AlexaDevice type supported
  • Apple Home *Device type usually supported
  • SmartThings *Device type usually supported
  • Home Assistant *Device type usually supported

This device uses Thread: the platform needs a Thread border router, for example a HomePod, Apple TV, Nest Hub or an Echo with Thread. Compare border routers →

Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.

Technical data

Manufacturer
Mayer & Co Beschläge GmbH
Product type
Sensors
Device type
Contact sensor
Radio protocol
Thread
Matter version
Matter 1.2
Model number
481963
First certified
January 29, 2025
Latest certification
April 14, 2026
Certificate ID
CSA26221MAT52073-24
Vendor / product ID (VID/PID)
0x1547 / 0x03EB (5447 / 1003)

Factory reset

General advice

  1. First remove the device in your smart home app (controller) so its pairing is deleted there.
  2. Reset the device as the manufacturer describes – often a reset button or a fixed sequence of power cycles. The exact sequence differs per device; use the manual.
  3. The device then starts in pairing mode. Set it up again with its QR code or setup code.

Resetting erases the device’s settings and assignments.

Update history (certified firmware versions)

2 certified versions, latest on April 14, 2026. New versions appear here automatically once they are listed in the certification database.

VersionCertified onMatterCertificate IDDownload firmware
1.1.0currentApril 14, 20261.2CSA26221MAT52073-24
Download firmware (696 KB)SHA-256: Ke8mVR3rCYfMgJvOedjwO06J7PNHXf8G14XeX9l+Uyw=
1.0.0First certificationJanuary 29, 20251.2CSA25067MAT44985-24

The files are hosted by the manufacturer and only linked here (details and checksum from the CSA DCL). Matter devices usually update automatically through the manufacturer’s app; manual installation is only needed if the manufacturer provides for it. Use at your own risk.

Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.

More devices from Mayer & Co Beschläge GmbH

All devices from Mayer & Co Beschläge GmbH →

Similar devices