Govee Bubble Light Projector
Certified on June 8, 2026, updates are not expected yet
Govee Bubble Light Projector by Govee: certified Matter device (Extended color light). Radio: Wi-Fi. Matter 1.3.
Price comparison
Compatibility with smart home platforms
Whether the platform supports this device type (Extended color light). This is an assessment based on the platforms’ lists, not a guarantee for every feature.
- Google HomeDevice type supported
- Amazon AlexaDevice type supported
- Apple Home *Device type usually supported
- SmartThings *Device type usually supported
- Home Assistant *Device type usually supported
Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.
Technical data
- Manufacturer
- Govee
- Product type
- Lighting
- Device type
- Extended color light
- Radio protocol
- Wi-Fi
- Matter version
- Matter 1.3
- Model number
- H1811
- First certified
- June 8, 2026
- Certificate ID
- CSA263OSMAT54188-24
- Vendor / product ID (VID/PID)
- 0x1387 / 0x1811 (4999 / 6161)
Factory reset
General advice
- First remove the device in your smart home app (controller) so its pairing is deleted there.
- Reset the device as the manufacturer describes – often a reset button or a fixed sequence of power cycles. The exact sequence differs per device; use the manual.
- The device then starts in pairing mode. Set it up again with its QR code or setup code.
Resetting erases the device’s settings and assignments.
Update history (certified firmware versions)
One version is certified so far (since June 8, 2026). New versions appear here automatically.
| Version | Certified on | Matter | Certificate ID |
|---|---|---|---|
| 1.0 | June 8, 2026 | 1.3 | CSA263OSMAT54188-24 |
Articles about this device
Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.
