Dual Socket Smart Plug
Firmware actively maintained: latest certified update on September 29, 2026
Dual Socket Smart Plug by GE Lighting, a Savant company: certified Matter device (On/off plug-in unit). Radio: Wi-Fi. Matter 1.3.
Price comparison
No price comparison has been set up for this device yet.
Compatibility with smart home platforms
Whether the platform supports this device type (On/off plug-in unit). This is an assessment based on the platforms’ lists, not a guarantee for every feature.
- Google HomeDevice type supported
- Amazon AlexaDevice type supported
- Apple Home *Device type usually supported
- SmartThings *Device type usually supported
- Home Assistant *Device type usually supported
Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.
Technical data
- Manufacturer
- GE Lighting, a Savant company
- Product type
- Plugs & in-wall actuators
- Device type
- On/off plug-in unit
- Radio protocol
- Wi-Fi
- Matter version
- Matter 1.3
- Model number
- CPLGID2BLW1MS
- First certified
- March 5, 2026
- Latest certification
- September 29, 2026
- Certificate ID
- CSA264ZOMAT55876-24
- Vendor / product ID (VID/PID)
- 0x1339 / 0x0055 (4921 / 85)
Reset GE Lighting, a Savant company Dual Socket Smart Plug
How to factory reset GE Lighting, a Savant company Dual Socket Smart Plug so you can set up the Matter device again or hand it on. Remove the device in your controller first, otherwise an entry stays behind there.
Manufacturer’s note (certification database)
Press and hold any power button until the indicator turns red (about 10 seconds). Release the button and wait for the indicator light to start blinking blue.
Resetting erases the device’s settings and assignments.
How do I factory reset GE Lighting, a Savant company Dual Socket Smart Plug?
The steps are in the section on this page. Remove the device in your controller first, then perform the reset.
Do I have to remove the device from the app first?
Ideally yes: remove it in your controller or smart home app first so its pairing is deleted there. Then reset the device.
What is lost when I reset it?
The device’s settings and assignments, including its connection to all Matter systems (multi-admin). You can set it up again afterwards.
The reset does not work – what now?
Check the manufacturer’s manual and support to see whether the procedure applies to your model. Check power and range; Thread devices need a reachable border router.
Manufacturer links
Update history (certified firmware versions)
2 certified versions, latest on September 29, 2026. New versions appear here automatically once they are listed in the certification database.
| Version | Certified on | Matter | Certificate ID | Download firmware |
|---|---|---|---|---|
| 1.03.102current | September 29, 2026 | 1.3 | CSA264ZOMAT55876-24 | |
| 1.03.100First certification | March 5, 2026 | 1.3 | CSA261EBMAT51219-24 | Download firmware (1.8 MB)SHA-256: zhvVSod7ljK2AnkQeLeOCGV2HZIfk5grEm8ajeAZ+8w= |
The files are hosted by the manufacturer and only linked here (details and checksum from the CSA DCL). Matter devices usually update automatically through the manufacturer’s app; manual installation is only needed if the manufacturer provides for it. Use at your own risk.
Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.