EPSON Projector EF-200
Only the initial certification so far (March 15, 2026), no update certified
EPSON Projector EF-200 by EPSON: certified Matter device (Basic video player). Radio: Wi-Fi. Matter 1.4.
Price comparison
No price comparison has been set up for this device yet.
Compatibility with smart home platforms
Whether the platform supports this device type (Basic video player). This is an assessment based on the platforms’ lists, not a guarantee for every feature.
- Google HomeNot on the platform’s list
- Amazon AlexaNot on the platform’s list
- Apple Home *Unclear, check the manufacturer’s information
- SmartThings *Unclear, check the manufacturer’s information
- Home Assistant *Unclear, check the manufacturer’s information
Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.
Technical data
- Manufacturer
- EPSON
- Product type
- TV & audio
- Device type
- Basic video player
- Radio protocol
- Wi-Fi
- Matter version
- Matter 1.4
- First certified
- March 15, 2026
- Certificate ID
- CSA261GAMAT51290-60
- Vendor / product ID (VID/PID)
- 0x15B7 / 0x0212 (5559 / 530)
Factory reset
General advice
- First remove the device in your smart home app (controller) so its pairing is deleted there.
- Reset the device as the manufacturer describes – often a reset button or a fixed sequence of power cycles. The exact sequence differs per device; use the manual.
- The device then starts in pairing mode. Set it up again with its QR code or setup code.
Resetting erases the device’s settings and assignments.
Update history (certified firmware versions)
One version is certified so far (since March 15, 2026). New versions appear here automatically.
| Version | Certified on | Matter | Certificate ID |
|---|---|---|---|
| V1.0.0.0 | March 15, 2026 | 1.4 | CSA261GAMAT51290-60 |
Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.
