Mado Dynamic C-Series
Only the initial certification so far (March 16, 2026), no update certified
Thread border router required. This device uses Thread and needs a Thread border router, for example a HomePod, Apple TV, Nest Hub or Echo. Compare border routers →
Mado Dynamic C-Series by Dendo: certified Matter device (Window covering). Radio: Thread. Matter 1.4.
Price comparison
No price comparison has been set up for this device yet.
Compatibility with smart home platforms
Whether the platform supports this device type (Window covering). This is an assessment based on the platforms’ lists, not a guarantee for every feature.
- Google HomeDevice type supported
- Amazon AlexaDevice type supported
- Apple Home *Device type usually supported
- SmartThings *Device type usually supported
- Home Assistant *Device type usually supported
This device uses Thread: the platform needs a Thread border router, for example a HomePod, Apple TV, Nest Hub or an Echo with Thread. Compare border routers →
Data as of 2026-10-28. Platforms keep adding support; check the manufacturer’s information before buying. Platforms marked * publish no list of their own, so the entries are based on reports.
Technical data
- Manufacturer
- Dendo
- Product type
- Shades & covers
- Device type
- Window covering
- Radio protocol
- Thread
- Matter version
- Matter 1.4
- Model number
- MC01-05IB
- First certified
- March 16, 2026
- Certificate ID
- CSA261GKMAT51300-24
- Vendor / product ID (VID/PID)
- 0x151D / 0x1001 (5405 / 4097)
Setup (manufacturer instructions)
Tap the square button, then scan the Matter QR code using the desired ecosystem app and follow on-screen instructions.
Reset Dendo Mado Dynamic C-Series
How to factory reset Dendo Mado Dynamic C-Series so you can set up the Matter device again or hand it on. Remove the device in your controller first, otherwise an entry stays behind there.
Manufacturer’s note (certification database)
Hold the square button until the LED above it turns solid amber, then release.
Resetting erases the device’s settings and assignments.
How do I factory reset Dendo Mado Dynamic C-Series?
The steps are in the section on this page. Remove the device in your controller first, then perform the reset.
Do I have to remove the device from the app first?
Ideally yes: remove it in your controller or smart home app first so its pairing is deleted there. Then reset the device.
What is lost when I reset it?
The device’s settings and assignments, including its connection to all Matter systems (multi-admin). You can set it up again afterwards.
The reset does not work – what now?
Check the manufacturer’s manual and support to see whether the procedure applies to your model. Check power and range; Thread devices need a reachable border router.
Manufacturer links
Update history (certified firmware versions)
One version is certified so far (since March 16, 2026). New versions appear here automatically.
| Version | Certified on | Matter | Certificate ID | Download firmware |
|---|---|---|---|---|
| 1.0.3 | March 16, 2026 | 1.4 | CSA261GKMAT51300-24 | |
| 1.0.5listed in the DCL, not certified | Download firmware (691 KB)SHA-256: sKJSLGK3T821dz2TxyftS986Co3fW+o62K6OFEOdOE4= |
The files are hosted by the manufacturer and only linked here (details and checksum from the CSA DCL). Matter devices usually update automatically through the manufacturer’s app; manual installation is only needed if the manufacturer provides for it. Use at your own risk.
Source: Distributed Compliance Ledger of the Connectivity Standards Alliance (as of November 3, 2026). No guarantee.